Liquipak Black Spot Remover

Liquipak Black Spot Remover Liquipak Black Spot Remover is a concentrated formula designed to remove the toughest of built-in black spots. It is suitable for all stone types, and you can see clear results in as little as 1 hour. Not for use on lawns, flowerbeds, vegetable plots or around trees and shrubs. Keep people and pets away from the treated area for 2 days after application.  This product contains Sodium Hypochlorite.  Suitable for Patios Concrete Block paving Stone Steps Paths Masonry Cladding Brickwork How to use Dilution ratio: Black Spot Remover is a concentrated product and can be diluted from 1:1 up to 1:3 depending on the surface. Directions for use: Remove any loose dirt and debris so that the area is smooth and ready for application. We advise pressure washing before the application. A three-step application process is required: 1. Apply an even layer of product to the affected area by spraying horizontally. 2. Repeat the process going vertically. 3. And then around the edges until the area is fully saturated. Leave the product to work for 45-60 minutes. If the surface starts to dry out, apply more product to keep the area saturated at all times. If the surface dries out during this time, the cleaning process will stop. It is advised to agitate the solution after application with a soft-bristled brush. After 45-60 minutes, clean the area thoroughly with a jet wash.  Some black spots can be stubborn depending on how old they are or how long they have been on the surface. On some occasions, there may be some black spots remaining after the initial application. Repeat the application process and the second treatment will fully eradicate the black spots. Safety Download Safety Data Sheet Please note that Sodium Hypochlorite is classified as a corrosive liquid therefore, it must be delivered to business addresses only and cannot be delivered to anyone under the age of 18.   As of the 1st of October 2023, this product is a reportable substance in accordance with The Control of Explosives Precursors and Poisons Regulations 2023. This applies to all Sodium Hypochlorite solutions above 6% available chlorine. H410: Very toxic to aquatic life with long lasting effects. H314: Causes severe skin burns and eye damage. P264: Wash thoroughly after use. P280: Wear protective gloves/protective clothing/eye protection/face protection. P301 P330 P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303 P361 P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P304 P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 P351 P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER/doctor. P501: Dispose of the contents and/or its container in line with regulations on dangerous waste or packaging and waste packaging respectively.